PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Mitsubishi xD300U (Rev D).prj'
PROJ-NAME='Mitsubishi xD300U'
PROJ-DRIVER-REV='Rev D'  ; Rev D - no material changes from Rev C, incremented revision for Application Note format update -- BT
DOC-REV-USER-MESSAGE['Rev B'] = "Uses an increased warm-up period to ensure that all functionality of the projector is available before allowing access to the SmartPanel buttons. The user is locked out from making any command for 75 seconds after power on. Refer to the App. Notes for further explaination."
DOC-REV-USER-MESSAGE['Rev C'] = "Uses a decreased warm-up period, which allows control of the projector approximately 30 seconds after power on. However, if the user attempts to power the projector off before 75 seconds has elapsed, the projector will not obey the command and it will remain on. After a period of time, if Power Polling is enabled, the Panel will turn back on. This could cause user confusion. Refer to the App. Notes for further explaination."
IR-TIME-0L=550u
IR-TIME-0H=550u
IR-TIME-1L=1.7m
IR-TIME-1H=550u
PROJ-BAUD-RATE=9600,8,N,1
IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""
RSCODE['_POWER POLL']="$30,$30,'vP',13",REPEATS=1
RSCODE['POWER ON']="$30,$30,$21,13",REPEATS=1
RSCODE['POWER OFF']="$30,$30,$22,13,$30,$30,$22,13,D4s",REPEATS=1
RSCODE['VOL UP']="$30,$30,'r06',13,D29m",REPEATS=1
RSCODE['VOL DOWN']="$30,$30,'r07',13,D29m",REPEATS=1
RSCODE['VIDEO 1']="$30,$30,'_v1',13",CONTINUE='^DELAY2',REPEATS=1,IS-SELECTION
RSCODE['VIDEO 2']="$30,$30,'_v2',13",CONTINUE='^DELAY2',REPEATS=1,IS-SELECTION
RSCODE['COMPUTER 1']="$30,$30,'_r1',13",CONTINUE='^DELAY2',REPEATS=1,IS-SELECTION
RSCODE['COMPUTER 2']="$30,$30,'_r2',13",CONTINUE='^DELAY2',REPEATS=1,IS-SELECTION
RSCODE['KEYSTONE']="$30,$30,'r43',13",REPEATS=1,IS-HIDDEN
RSCODE['EXPAND']="$30,$30,'r02',13",IS-HIDDEN
RSCODE['MUTE ON']="$30,$30,'MUTE1',13",REPEATS=1,IS-HIDDEN
RSCODE['MUTE OFF']="$30,$30,'MUTE0',13",REPEATS=1,IS-HIDDEN
RSCODE['MENU']="$30,$30,'r54',13",REPEATS=1,IS-HIDDEN
RSCODE['ENTER']="$30,$30,'r10',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ UP']="$30,$30,'r53',13",IS-HIDDEN
RSCODE['ADJ DOWN']="$30,$30,'r2b',13",IS-HIDDEN
RSCODE['ADJ LEFT']="$30,$30,'r4f',13",IS-HIDDEN
RSCODE['ADJ RIGHT']="$30,$30,'r59',13",IS-HIDDEN
RSCODE['AUTO POSITION']="$30,$30,'r09',13",REPEATS=1,IS-HIDDEN
RSCODE['STILL']="$30,$30,'ra4',13",REPEATS=1,IS-HIDDEN
RSCODE['PinP']="$30,$30,'r04',13",REPEATS=1,IS-HIDDEN
RSCODE['KEYSTN +']="$30,$30,'r06',13,D29m",IS-HIDDEN
RSCODE['KEYSTN -']="$30,$30,'r07',13,D29m",IS-HIDDEN
RSCODE['^DELAY']="D7.395s",REPEATS=1
RSCODE['^DELAY2']="D4.872s",REPEATS=1
BYTES-TO-QUEUE=2
POWER-POLL-INTERVAL=7.52s
POWER-POLL-TIMEOUT=1.41s
POWER-POLL-THRESHOLD=3
POWER-POLL-STARTBYTE=5
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="$31"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=True
POWER-POLL-DURING-LOCKOUT=True
POWER-POLL-LOCKOUT=1.5275M
PROJ-USES-ABSOLUTE-VOL=False
VOL-MUTE=0
VOL-RANGE=63
VOL-FLOOR=0
IO-DOWNTIME=203m
WARM-UP-DELAY=33s
POWER-ON-DELAY=29s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=25.8u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5
DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='_POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOL UP'
DEFAULT-CORE-FUNCT[VDN]='VOL DOWN'
DEFAULT-SELECTION[1]='VIDEO 1'
DEFAULT-SELECTION[2]='VIDEO 2'
DEFAULT-SELECTION[3]='COMPUTER 1'
DEFAULT-SELECTION[4]='COMPUTER 2'
DEFAULT-HID-FUNCT[OFF]='MENU'
DEFAULT-HID-FUNCT[VUP]='ADJ UP'
DEFAULT-HID-FUNCT[VDN]='ADJ DOWN'
DEFAULT-HID-FUNCT[1]='AUTO POSITION'
DEFAULT-HID-FUNCT[2]='ENTER'
DEFAULT-HID-FUNCT[3]='ADJ LEFT'
DEFAULT-HID-FUNCT[4]='ADJ RIGHT'
DEFAULT-LOCKOUT=1.3M
POWER-SENSE-OPTIONS=RS232Poll,None,Sensor
IR-WIRING-OPTIONS=